[Pc_Support] Items for loan/sale at InstallFest ...
Bryan J. Smith
b.j.smith at ieee.org
Mon Mar 20 10:35:41 EST 2006
Okay, since the InstallFest is on for April 1st, I have a couple of
items I'm bringing. As always, the deal is that you take it home for
a few weeks to see if you like it. If it works for you, then we can
work out the details of any sale.
Again, I still have my Abit BP6 Server/Workstation:
- Antec Black Case w/ATX PS
- i440BX chipset + HPT366 ATA
- (2) Celeron, 128KiB L2, 466MHz
- (2) 256MiB Registered ECC PC100 SDRAM (512MiB total)
And I now have my former Tyan S2518 Server:
- 4U, Ten (10) 5.25" Rackmount Enclosure (with rails)
- Enermax 435W ATX Server PS
- (8) 3.5" hot-swap ATA drives (temp/rpm on front)
- ServerWorks ServerSet IIILE-SL w/on-board dual-10/100 NICs
- 3Ware Esclade 7800 (64-bit PCI, 1MB SRAM, 8xATA/133)
- (2) Pentium III 750MHz Coppermine
- (2) 256MiB Registered ECC PC100 SDRAM (512MiB total)
- (2) Maxtor 80GB 5400rpm Drives (RAID-1 config)
- (4) Western Digital 80GB 7200rpm Drives (RAID-5 config)
I can add/remove any cards/drives/bays that you want from either
system to reconfigure as you need/want, don't need/want. I have
extra DVD-R/RAM/RW drives too. My wife is going to kill me if I
don't get that 4U sucker out of my dining area. ;->
Just let me know what you're interested in.
-- Bryan
P.S. I also have a 72" APC-Compaq style Rackmount in my garage that
is only going to start rusting if I don't get out of it there. I'd
rather just give it away to a good home than get anything for it. It
has a 2200VA UPS at the bottom, although it may be too rusted. But
the rackmount chassis and covers aren't rusting (yet -- well
painted). You'll have to drive to Oviedo to check it out, because
I'm not hauling it to the InstallFest. But it's out there, for
_free_! I just don't have room for it in my home (and I only have a
1 car garage).
--
Bryan J. Smith Professional, Technical Annoyance
b.j.smith at ieee.org http://thebs413.blogspot.com
--------------------------------------------------
I'm a Democrat. No wait, I'm a Republican. Hmm,
it seems I'm just whatever someone disagrees with.
More information about the Pc_support
mailing list