[Pc_Support] ServerWorks IIILE SuperMicro 370DLE mdma2?

[Jason Boxman]

I thought it was supposed to do udma2?

I'm stuck in mdma2.  Is that right?

nebula:/tmp# hdparm -i /dev/hda

/dev/hda:

 Model=Maxtor 6Y120L0, FwRev=YAR41VW0, SerialNo=Y41NK87E
 Config={ Fixed }
 RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=57
 BuffType=DualPortCache, BuffSize=2048kB, MaxMultSect=16, MultSect=off
 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=240121728
 IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
 PIO modes:  pio0 pio1 pio2 pio3 pio4
 DMA modes:  mdma0 mdma1 *mdma2
 UDMA modes: udma0 udma1 udma2 udma3 udma4 udma5 udma6
 AdvancedPM=yes: disabled (255) WriteCache=enabled
 Drive conforms to: (null):

 * signifies the current active mode

nebula:/tmp# hdparm /dev/hda

/dev/hda:
 multcount    =  0 (off)
 IO_support   =  0 (default 16-bit)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 65535/16/63, sectors = 240121728, start = 0

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SvrWks OSB4: IDE controller at PCI slot 0000:00:0f.1
SvrWks OSB4: chipset revision 0
SvrWks OSB4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: Maxtor 6Y120L0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: NEC CD-ROM DRIVE:282, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15

nebula:/tmp# lspci
0000:00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
0000:00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06)
0000:00:01.0 SCSI storage controller: QLogic Corp. ISP1080 SCSI Host Adapter 
(rev 01)
0000:00:02.0 VGA compatible controller: Matrox Graphics, Inc. MGA 2064W 
[Millennium] (rev01)
0000:00:06.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] 
(rev 08)
0000:00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 51)
0000:00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller
0000:00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 
04)
0000:01:01.0 RAID bus controller: 3ware Inc 3ware 7000-series ATA-RAID (rev 
01)

Thanks!

-- 

Jason Boxman
http://edseek.com/ - Linux and FOSS stuff